Supermicro H8QGI-F-O

Základné dosky

Základné dosky Supermicro podporujú najnovšiu generáciu procesorov Intel aj AMD, operačných pamätí a ponúkajú tie najpokročilejšie technológie v oblasti IT – NVMe, M.2, 10GbE sieťové porty. Vďaka ich vysokej škálovateľnosti a širokému výberu formátov dosiek je možné vyhovieť potrebám aj tých najnáročnejších zákazníkov. Supermicro ponúka najrozsiahlejší výber serverov určených do priemyselných prevádzok, čomu je prispôsobená aj celková kvalita základných dosiek. K výrobe základných dosiek Supermicro sa používajú materiály zaručujúce dlhú životnosť, čím je dosiahnutá minimálna miera poruchovosti. Generačnou obmenou prechádzajú dosky Supermicro cca raz za sedem rokov, čím je zaručená dlhá podpora zo strany výrobca. Každá základná doska Supermicro tiež umožňuje zadarmo inštaláciu špecializovaného software pre základný monitoring serveru.

Samozrejmosťou je možnosť zakúpenia NBD záruky podľa vlastného výberu, čo minimalizuje výpadok prevádzky aj v prípadoch so ktorými nejde dopredu kalkulovať. Štandardné NBD záruky sa poskytujú na 3 alebo 5 rokov. Pre viacej informácií sa obráťte na naše obchodné oddelenie.

Špecifikácie produktu

Product SKUs MBD-H8QGi-F H8QGi-F (Standard Retail Pack)   Physical Stats Form Factor SWTX Dimensions 16.48" x 13" (41.9cm x 33.0cm)   Processor/Chipset CPU Quad 1944-pin Socket G34 Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support Chipset AMD SR5690/SR5670/SP5100 Chipset   System Memory Memory Capacity 32 DIMM sockets Supports up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs Quad channel memory bus For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB, 8GB, 16GB, 32GB Memory Voltage 1.35V or 1.5V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices SATA AMD SP5100 (RAID 0, 1, 10) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC Network Controllers Intel® 82576 controller, Dual-Port    Gigabit Ethernet 10/100/1000BASE-T support VGA Matrox G200 16MB DDR2 graphics Super I/O Winbond® W83527 chip   Input / Output SATA 6x SATA2.0 (3Gb/s) Ports LAN 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI USB 7x USB 2.0 ports 2x Rear, 4x internal header, and 1x type A VGA 1x VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x serial port header Others 1 SATA DOM power connector, TPM header   Expansion Slots PCI-Express 2 PCI-E 2.0 x16 1 PCI-E 2.0 x8 1 PCI-E 2.0 x8 or 1 UIO slot Chassis ( Optimized for H8QGi-F ) 1U Chassis CSE-818TQ-1400LPB  Requires rev. K chassis, air shroud MCP-310-81807-0B* 2U Chassis CSE-828TQ+-R1400LPB  Requires rev. K chassis, air shroud MCP-310-82801-0N* CSE-828TQ+-R1K43LPB  Requires rev. K chassis, air shroud MCP-310-82801-0N* Tower / 4U Rackmount CSE-418E16-R1K62B  Requires air shroud MCP-310-84802-0B* CSE-748TQ-R1400B  Requires rev. K chassis, air shroud MCP-310-74802-0B* CSE-748TQ-R1K43B  Requires rev. K chassis, air shroud MCP-310-74802-0B* CSE-848A-R1K62B  Requires air shroud MCP-310-84802-0B* CSE-848E16-R1K62B  Requires air shroud MCP-310-84802-0B* Note * Sold separately, please refer to the chassis web spec for the air shroud info in the optional part list.   Server(s) ( with H8QGi-F ) Model(s) AS -2042G-TRF AS -4042G-TRF   System BIOS BIOS Type 16Mb SPI Flash ROM with AMI® BIOS BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3   Management Software IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Power Configurations ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery   PC Health Monitoring CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator FAN Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control   (4-pin fan only) Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 9x fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED +5V Standby Alert LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Specifications Operating Temperature:    10°C to 35°C (50°F to 95°F) Non-operating Temperature:    -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:    8% to 90% (non-condensing) Non-operating Relative Humidity:    5% to 95% (non-condensing)     Regulatory FCC Passed to meet FCC standard requirement

Retail Pack List   Part Number Qty Description H8QGi-F MBD-H8QGi-F -O 1 H8QGi-F Motherboard I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)