|
|
SSG-2027R-AR24 |
- SuperServer 2027R-AR24 (Black)
|
|
|
Super X9DRH-7TF |
|
|
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
|
|
Memory Capacity |
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
SCU SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 10
|
SAS |
- SAS2 via Broadcom 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
SCU SATA |
- 4x SATA 2.0 ports (3Gbps)
|
SAS |
|
LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 7x USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
|
VGA |
|
Serial Port / Header |
- 2x Fast UART 16550 serial COM port
(1 rear & 1 header)
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
|
PCI-Express |
- 1x PCI-E 3.0 x16 slot
- 4x PCI-E 3.0 x8 slots
|
|
|
Hot-swap |
- 24x Hot-swap 2.5" SAS2/SATA3 HDD Bays with direct attached backplane
|
|
|
SAS2 / SATA3 direct attached backplane |
|
|
Fans |
- 3x 8cm 9.5K RPM, 4-pin PWM fans
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
Certification |
Platinum Certified
[ Test Report ] |
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|