|
|
 |
Key Features
• Flexible Connectivity Options
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to
DDR4- 2400†MHz ; 24 DIMM slots
3. 1 PCI-E 3.0 x16 slot (FH, 10.5" L),
6 PCI-E 3.0 x8 slots (4 FH, 10.5" L,
1 LP, 1 Internal LP)
4. 4x 10GBase-T ports
5. 24 Hot-swap 2.5" Drive Bays:
10 SATA3 ports by default;
Optional drive support: 24 SAS3;
Optional 2 hot-swap 2.5" rear drive
bays for SSDs
6. 4 heavy duty fans w/ optimal
fan speed control
7. 1000W High efficiency (96%)
Redundant PSU; Titanium Level
|
|
| |
 |
|
|
|
|
|
 |
| SYS-2028U-TR4T+ |
- SuperServer 2028U-TR4T+ (Black)
|
| |
|
Super X10DRU-i+ |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
- NVDIMM: 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Connectivity |
- 4x 10GBase-T ports via AOC-2UR6-i4XT
- Intel® X540 10GBase-T
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| SATA |
|
| SAS |
- 24 SAS3 ports support via optional Add-on Cards
|
| LAN |
- 4 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
|
| Video |
|
| Serial Port / Header |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Net Weight: 36 lbs (16.4 kg)
- Gross Weight: 72 lbs (32.7 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2 Network activity LEDs
- System information (overheat/UID) LED
|
| |
|
| PCI-Express |
-
- 1 PCI-E 3.0 x16 slot (FH, 10.5" L)
- 6 PCI-E 3.0 x8 slots
(4 FH, 10.5" L, 1 LP, 1 Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
-
- 24 Hot-swap 2.5" Drive Bays:
10 SATA3 ports by default
- Optional drive support: 24 SAS3
Note: optional storage card is required to support more than 10 drives. |
| |
|
| 2U SAS/SATA backplane |
| |
|
| Fans |
- 4 heavy duty 8cm PWM fans
|
| |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
5°C to 40°C (41°F to 104°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRU-i+
CSE-219UAC-R1K02-T |
1
1 |
Super X10DRU-i+ Motherboard
2U Chassis |
| Add-on Card / Module |
AOC-2UR6-I4XT |
1 |
2U Ultra Riser based on Intel X540 controller with 4 10Gbase-T ports, 1 internal PCI-E x8 3.0 slot and 1 PCI-E x16 3.0 |
| Air Shroud |
MCP-310-82912-0N |
1 |
|
| Backplane |
BPN-SAS3-216A |
1 |
24-port 2U SAS3 12Gbps direct-attached backplane, support up to 24x 2.5-inch SAS3/SATA3 HDD/SSD |
| Cable 1 |
CBL-PWEX-0673 |
3 |
8 pin female to 2x big 4 pin female power, 65/70CM, 18AWG,RoHS/REACH |
| Cable 2 |
CBL-SAST-0591 |
1 |
MINI SAS HD-4 SATA,6G,INT,RF,Cross Over,75CM,75CM SB,30AWG |
| Cable 3 |
CBL-SAST-0657 |
2 |
MINI SAS HD(ST)-MINI SAS(RA-RS EXIT),6G,INT,55CM,SB,30AWG |
| Label |
LBL-0108 |
1 |
CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual |
MNL-1695-QRG |
1 |
SYS-2028U-T(N)R(4/4T/T/TP)+, QRG,HF,RoHS/REACH |
| Riser Card |
RSC-R1UW-E8R |
1 |
1U RHS WIO Riser card with one PCI-E x8 slot |
| Riser Card |
RSC-R2UW-4E8 |
1 |
2U LHS WIO Riser card with four PCI-E x4 slots |
| Heatsink / Retention |
SNK-P0058PSU |
2 |
2U Passive CPU Heat Sink for X10 2U 24-DIMM Ultra Series Servers,RoHS/REACH |
| Power Supply |
PWS-1K02A-1R |
2 |
1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
| Mounting Rails |
MCP-290-00053-0N
MCP-290-00060-0N |
1
1 |
Inner/outer rail set, quick-release type, 26.5" to 36.4"
Threaded rail adapter default for round hole rack |
|
|
|
