Komponenty

Single socket H3 (LGA 1150) supports Intel® 4th gen. Core i7/i5/i3, Pentium, Celeron processors Intel® Q87 Express Chipset Up to 16GB DDR3 non-ECC 1600MHz UDIMM in 2 sockets Dual Gigabit Ethernet LAN ports (1 Intel® i217LM & 1 Intel® i210AT) 5 SATA3 (6Gbps) 1 PCI-E 3.0 x16, 1 PCI-E 2.0 x4, and 1 PCI-E 2.0 x1 2 USB 3.0 (2 rear) 6 USB 2.0 (2 rear + 4 via headers) HD Audio 7.1 channel connector by Realtek ALC888S 1 DOM power connector, 1 SPDIF Out Header, 4 COM ports

Veľkosť: 40 x 40 x 56 mm Rýchlosť: 14 400 RPM / 10 700 RPM Hlučnosť: 59 dBA Prietok vzduchu: 27.5 CFM Konektor: 4 Pin

Intel® 82599EN 10GbE controller - Compact size microLP form factor - Single SFP+ port and dual USB 2.0 ports - PCI-E x8 2.0 (5GT/s) - iSCSI remote boot support - Fibre Channel over Ethernet (FCoE) Support - Intel® PROSet Utility for Windows® Device Manager

4U Double-Density SAS3 JBOD storage chassis 90 x 3.5" hot-swap SAS/SATA drive bay with SES3 90x 3.5" HDDs in 45x Hot-swap drive bays (2x HDD per bay) SAS or enterprise SATA HDD only recommended 48-port SC847D SAS3 12Gbps front expander board (cascade type configuration) 48-port 4U SC847D SAS2/SAS3 system/JBOD front midplane, support up to 48x 3.5-inch SAS2/SAS3/SATA3 HDD 42-port 4U SC847D SAS2/SAS3 JBOD rear midplane, support up to 42x 3.5-inch SAS2/SAS3/SATA3 HDD 1U 2000W Titanium Redundant Power Supply W/PMbus 7 x 92mm hot-swap fan(s)

1. 3U Rackmount Chassis 2. 16 x 3.5" hot-swap SAS/SATA drive bays 3. 1U 740W Redundant Platinum Single Output Power Supplies

2U Passive CPU Heat Sink for P9DSU 2U Series Servers

8th Generation Intel® Core™ i3 Processors, Intel® Celeron®, Intel® Pentium®, Intel® Xeon® E processor (Coffee Lake-S) Server, Intel® Xeon® E processor (Coffee Lake-S) Workstation., Single Socket H4 (LGA 1151) supported, CPU TDP support Up to 95W TDP Intel® C246 Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (in x16 slot), 1 PCI-E 3.0 x4, 1 PCI-E 3.0 x1, 2 PCI-Ex16 slots are running at NA/16, or 8/8 1 PCI, 1 - 5V PCI 32bit M.2 Interface: 2 PCI-E 2.0 x4, RAID 0 & 1 M.2 Form Factor: 22110 M.2 Key: M-Key M.2#1~2 are shared with SATA #6~7, M.2#2 is shared with U.2 U.2 Interface: 1 PCI-E 3.0 x4 1 HDMI port, 1 DVI - I port, 1 DP (DisplayPort) port, HDMI is HDMI2.0a, DP is DP1.2, Intel® C246 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10 Single LAN with Intel® Ethernet Controller I210-AT Single LAN with Intel® PHY I219LM LAN controller Support vPro

Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3/v4 family; UPI up to 9.6GT/s Intel® C612 chipset Up to 2TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz; 16 DIMM slots 3 PCI-E 3.0 x16 and 3 PCI-E 3.0 x8 Intel® i350 Dual port GbE LAN 10 SATA3 (6Gbps); RAID 0, 1, 5, 10

1. 280W Power Supply 2. 2x 3.5" Hot-swappable SAS / SATA Drive Bay 3. 1x Slim CD-ROM Drive (Optional) 4. 2x 10cm PWM Blower Fans 5. 1x Full-size, Full-length I/O Expansion Slot

Key Features 1U rackmount chassis, support for motherboard size: 12" x 13" E-ATX Optimized for X11 WIO (W series) motherboards 8 x 2.5" hot-swap SAS/SATA drive bay SAS or enterprise SATA HDD only recommended 8-port 1U SAS3 12Gbps Hybrid backplane, support up to 6x 2.5-inch SAS3/SATA3 HDD/SSD and 2x SAS3/SATA3/NVMe Storage Devices 1U Redundant 700/750W Single Output Power Supply Platinum level, 54.5mm width 2 full height expansion slot(s) (Riser Card Required), 1 low-profile expansion slot(s) (Riser Card Required) 4 x 40x56mm counter-rotation PWM fan(s) Optional 2 x fan for PCI card cooling

Intel® Pentium™ Processor N4200 (6W, 4C) Intel® Goldmont microarchitecture 14nm System-on-Chip Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 socket Dual GbE LAN with Intel® i210-AT 1 M.2 B-Key 2280, 1 Full size Mini-PCI-E, 1 SATA 3.0 1 HDMI, 1 VGA, 1 48-bit LVDS, Intel® HD Graphic 3 independent displays 1 USB 3.1 Gen2 Type-C port, 2 USB 3.0 ports, 4 USB 2.0 ports, 4 COM ports, 1 SATA 3.0, 8-bit GPIO, SMBus Supports on board TPM 2.0 Supports 12V DC power input

-Form Factor: 2U Rackmount -Hot-swap: 6x Hot-swap 2.5" SATA3/SAS2 HDD trays -Fans: 4x 8cm heavy duty PWM fans with optimal fan speed control -Width: 17.25" (438mm) -Height: 3.47" (88mm) -Depth: 26.75" (679mm)